igniting the goodness and potential within individuals.Here, you will gain a comprehensive understanding of us. Welcome to establish further connections with us
Grades |
Base Resin |
MFI(g/10min) [1]190℃,2.16kg [2]230℃,2.16kg |
Grafting Level (MAH wt%) |
Applications | ||
N402 | POE | 0.5-2.0[1] | 0.4-0.8 |
PA impact modifier with high cost performance. It has good processing fluidity and impact at room and low temperature conditions. Loading dosage: 5-20% |
||
N406 | POE | 0.5-2.5[2] | 0.45-0.8 |
General PA impact modifier for PA and PA/GF toughening. Cost effective. Loading dosage 5-20%. |
||
N409D | POE | 0.5-1.5[1] | 0.3-0.8 |
PA impact modifier. Cost-effective. Suitable for PA/GF toughening. Loading dosage 5-20%. |
||
N410 | POE | 0.5-2.0[1] | 0.4-0.8 |
High strength PA toughening agent which has higher tensile strength.Typically used in PA heat insulation strip & PA compounds,etc.Loading dosage 5-20%. High melting point toughening agent, it can be used for PA direct injection molding toughening. Loading dosage 5-10%. |
||
N413A | POE | 0.3-0.8[1] | ≥0.6 |
PA impact modifier for low temperature conditions. Applications include super-tough PA at -50°c. Loading dosage 5-25%. |
||
N413A | POE | 0.4-1.5[1] | 0.4-0.8 |
Significantly improves the load impact strength of the compound. Typical applications include super-tough PA at -40°c. Loading dosage 5-25% |
||
N428 | EPDM | 0.1-1.5[1] | 0.4-0.7 |
PA toughening agent with high toughness in ultra-low temperature and had obvious toughening effect for PA at -60°C. Excellent low temperature resistance. Typical applications is increasing toughness for regular PA and toughening PA in low temperature. Loading dosage: 5-25% |